Radial PROMS2 - Mic splitter passive with 1-input 2-direct outs & 1 Eclipse isolated output

THIS PRODUCT IS FOR ONLINE ORDER ONLY. Passive 2-way Microphone SplitterThe ProMS2 is a balanced mic-level splitter designed to send a signal to multiple destinations simultaneously on stage with one transformer-isolated output and two direct outputs.PhotosSend one microphone signal to three destinations simultaneouslyEclipse transformer for clean & transparent audioEliminates hum and buzz caused by ground loopsSingle isolated output provides optimal noise rejectionPortable mic splitting for stage useThe ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops while delivering a wide frequency response and low distortion. Ground lifts on the outputs help further reduce noise while an input pad allows line-level sources to be connected as well. The ProMS2 can be rack mounted for touring and installation purposes with up to eight fitting in the Radial J-Rak.ProMS2 ApplicationsUsing the ProMS2 for a 2-way splitThe Radial ProMS2 is the perfect interface for splitting a microphone to feed more than one mixer at the same time. 100% isolation eliminates potential ground loops between the two consoles for quiet performance while the main output provides a 48V phantom power return path to the mic.Using the ProMS2 for a 3-way splitSometimes you need to feed the main mixer stage monitors and a recorder at the same time. Connect the source mic to the ProMS2 XLR input the direct out with phantom power return path to the main mixer the direct out with ground lift to the monitor desk and the isolated out to the recording system.Using the ProMS2 to compare two mic preampsIn the studio it is often advantageous to compare the sound of two mic preamps on a particular voice instrument or amplifier. The ProMS2 makes comparing preamps easy! Simply connect the mic to the ProMS2 and then split the signal to feed the two preamps and record with the one that sounds best!VideosPeter Janis explains the ProMS2 Passive Microphone splitterRelated ProductsJS2Microphone SplitterThe JS2 is a high performance microphone splitter designed to send a mic output to two destinations at once without signal degradation or noise.JS3Microphone SplitterThe JS3 is a high performance microphone splitter designed to send a mic output to three destinations at once without signal degradation or noise.CatapultCat 5 Analog SnakeThe Catapult is a passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.Exo-PodBroadcast SplitterThe Radial Exo-Pod is a passive broadcast splitter that can take the balanced line output from a mixing console and distribute the signal to 14 hand-held recorders video cameras or wireless receivers.AccessoriesJ-Rak 88-space Rack AdapterThe J-Rak 8 allows you to mount up to eight Radial DIs in standard 19 equipment racks for touring or permanent installation.J-Rak 44-space Rack AdapterThe J-Rak 4 allows you to mount four Radial DIs in standard 19 equipment racks for touring or permanent installation.ProMS2 ResourcesPart no: R800 1122 00