Radial LX-2 - Passive Microphone Splitter - Single Isolated Out - Jensen transformer

THIS PRODUCT IS FOR ONLINE ORDER ONLY. Passive Line-Level Splitter & AttenuatorThe LX-2 is a passive balanced line-level audio splitter that allows you to easily send an audio signal to two different destinations at once without noise while also providing the ability to attenuate the signal when needed.PhotosSplit one audio signal to two destinations simultaneouslyJensen transformer equipped for exceptional audio qualityEliminates hum and buzz caused by ground loopsVariable trim control can be engaged for easy level adjustmentSplit & attenuate audio with easeThe LX-2 performs the dual functions of splitting a line level audio signal and providing level attenuation where necessary. A premium Jensen transformer inside provides exceptional frequency response and phase coherency to ensure that the highest audio quality is maintained while isolating the two outputs from each other to eliminate hum and buzz from ground loops. For situations where a level adjustment is required the trim control on the LX-2 allows you to attenuate overly hot signals. This gives you the ability to drive your mic preamps hard to achieve coloration while trimming the level at the LX-2 to avoid clipping the inputs of your recording interface. This trim control is activated by a recessed €œset & forget' switch; if attenuation is not needed simply disengage this switch to prevent accidental and unwanted level adjustments.LX-2 ApplicationsSplitting line outputs on stageSend the output of a mic pre or line level device to a recording interface as well as the PA systemSplit the output of a mic preamp in the studioSend the output of a single preamp to two compressors simultaneously. Use the level trim to push your preamp harder for coloration without distorting the compressor inputs.Using the LX-2 for parallel effects processingSplit the output of a preamp to feed an outboard effects device while also sending a clean signal to your recording interface. Blend the signals together in your DAW for parallel processing.Related ProductsLX-3Line-Level SplitterThe LX-3 is a balanced line-level audio splitter designed to send a signal to as many as three destinations at once without noise.JS2Microphone SplitterThe JS2 is a high performance microphone splitter designed to send a mic output to two destinations at once without signal degradation or noise.LX88-channel Line-Level SplitterThe Radial LX8 is an 8-channel rack mounted line level splitter that lets you feed two audio systems without signal degradation or noise caused by ground loops.Exo-PodBroadcast SplitterThe Radial Exo-Pod is a passive broadcast splitter that can take the balanced line output from a mixing console and distribute the signal to 14 hand-held recorders video cameras or wireless receivers.CatapultCat 5 Analog SnakeThe Catapult is a passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.AccessoriesJ-Rak 88-space Rack AdapterThe J-Rak 8 allows you to mount up to eight Radial DIs in standard 19 equipment racks for touring or permanent installation.J-Rak 44-space Rack AdapterThe J-Rak 4 allows you to mount four Radial DIs in standard 19 equipment racks for touring or permanent installation.J-ClampJ-Class Flange Mount AdaptorsThe J-Clamp replaces the outer shell of full-sized Radial DI boxes such as the JDI and J48 allowing you to permanently affix them to a desktop or inside a rack.LX-2 ResourcesPart no: R800 1033 00