NU-X Mini Core Series Damp Reverb Effects Pedal NRV-3 with 3 Modes: Plate, Spring, Hall, True-bypass, Stereo I/O, USB-C Firmware Update

DAMP Reverb (NRV-3) is a mini reverb pedal with 3 different reverb types including Plate, Spring, and Hall. You can switch the types by tapping the tap switch. DAMP reverb offers True-bypass and Buffer-bypass (Trails), just hold the footswitch to boot-up the pedal (do not connect USB). The footswitch indicator will show you the bypass status. (While you boot-up the pedal, if the FS indicator flashes "Green" = BF, "Red" = TB) FEATURES: 3 reverb types in the mini enclosure Plate: Clear ambience. Renowned studio reverb found on classic recordings Spring: Bottom-heavy dimension flashback. Classic "surf" reverb; great for Rockabilly! Hall: Lush & large encompassing reverb with warm decay Holding footswitch for secondary function. (Shimmer, Freeze) True-bypass or Buffer-bypass (Trails) Supports Stereo I/O with TRS Cable Low power consumption. (less than 100mA) Analog dry signal for low noise and zero latency Mini but mighty! It also supports Stereo input & output (Use 1/4" TRS plug, and choose Stereo mode) The USB-C port is for firmware update. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software SPECIFICATIONS: Input Impedance: 1M ohms Output Impedance: 10K Dynamic Range: 103 dB DSP Processing: 48KHz / 32-bit A/D D/A Sampling Rate: 48KHz / 24-bit Power: 9V DC (Negative tip, Optional ACD-006A adapter) Current Draw: Less than 100mA Dimensions: 94 x 51 x 53mm (L x W x H) Weight: 175g TYPES OF REVERB Plate Reverb was inspired by EMT 140, which made use of a metal plate suspended in a steel frame, that was able to recreate reverberations similar to those heard in an acoustic space; renowned studio reverb found on classic recordings. Spring Reverb simulates the spring tank that a mechanical disturbance propagated in a spring by creating a mechanical oscillation. To achieve a "bouncy" tone, Spring reverb is a solid choice for adding a bottom-heavy dimension. Classic "surf" reverb; great for Rockabilly too! Hall Reverb is based on the legendary Lexicon 224 which was unleashed in 1978. We simplified the DECAY, LEVEL, and TONE controls. It has famously lush reverb tail which single-handedly defined the sound of an entire era. Large encompassing reverb with warm decay. * All of the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with Pro Music Australia, NUX Effects and Cherub Technology CO. LTD.