Korg ARP 2600 M Semi Modular Synthesizer Synth Mini w/ Case

When the ARP 2600 FS was announced in January 2020, it quickly became a phenomenal success with musicians all over the world recognizing the faithfulness to the original ARP 2600.The ARP 2600 M is around 60% the original size, making it lighter, more portable and easier to place and use in a studio. It integrates the same analog circuitry and components as the ARP 2600 FS, thus faithfully reproducing the characteristic ARP sound.The new ARP 2600 M is not only faithful to the original, it also includes an array of added features that will make it even easier to use:- Plug and play: Connect any class compliant MIDI controller such as a KORG microKeys, nanokeys or SQ-64 to one of the ARP 2600 M’s USB ports (USB-A and USB-B) and automatically get full control of your instrument!- Resized: The new size makes it easier to visualize your patch and also allows you to use shorter patch cables- Two types of filters from two versions of the original ARP 2600?4012 type, 4072 type DIN MIDI IN added- Pitch-bend, Modulation and Portamento ON/OFF can be controlled through MIDI CC messages (USB/DIN MIDI)- Normalized voltage: The threshold of the trigger signal required to activate the ADSR through the S/H GATE JACK has become 5V, making it much easier to use in combination with other gear such as volcas or Eurorack modules- Improved Attack and Release time ratios- L/R Stereo Output Jack (instead of XLR)- Speakers turn automatically off when using headphones- Improved, smoother sliders Specifications Operating temperature range 0 – +40 °C (non?condensing) Maximum Polyphony 2 voices for duo phonic; normally monophonic VCO-1 (Voltage Controlled Oscilator 1) Waveforms Sawtooth, square Frequency range Approx. 0.03 Hz – 30 Hz (low freq. mode)Approx. 10 Hz - 10 kHz (audio mode) Voltage controlled response 1V/oct. VCO-2 (Voltage Controlled Oscillator 2) Waveforms Sawtooth, pulse (dynamic pulse), triangle, sine Frequency range Approx. 0.03 Hz – 30 Hz (low freq. mode)Approx. 10 Hz - 10 kHz (audio mode) Pulse width 10% – 90% Voltage controlled response 1V/oct. VCO-3 (Voltage Controlled Oscilator 3) Waveforms Sawtooth, pulse (dynamic pulse) Frequency range Approx. 0.03 Hz - 30 Hz (low freq. mode)Approx. 10 Hz - 10 kHz (audio mode) Pulse width 10% – 90% Voltage controlled response 1V/oct. VCF (Voltage Controlled Filter) Type Low-pass (TYPE I : early 24 dB/oct., TYPE II: late 24 dB/oct.) Frequency range Approx. 10 Hz - 10 kHz Resonance 1/2 - self oscillate VCA (Voltage Controlled Amplifier) Control voltage AR type (internally connected)ADSR type (internally connected) Noise generator Noise spectrum types (white and pink) RING MODULATOR Type Analog multiplier Input signal (Internally connected) VCO-1 sawtooth wave, VCO-2 sine wave SAMPLE & HOLD Sampled signal Noise (internally connected) AUDIO OUTPUT JACKSFront Panel (LEFT, RIGHT OUTPUT jacks Connector ?3.5 mm monaural phone jack Maximum output level +9 dBu @ 10 k? load Output impedance 1.2 k? Side Panel Connector ?6.3 mm monaural phone jack Maximum output level +4 dBu @ 600 k? load Output Impedance 1.2 k? HEADPHONES JACK Connector ?6.3 mm stereo phone jack Maximum output level 50 mW + 50 mW @ 33? load Output impedance 20? EXTERNAL AUDIO INPUT (PREAMPLIFIER INPUT) JACK Connector ?3.5 mm monaural phone jack Maximum input level +2dBu *RANGE x10, GAIN knob Max( Input impedance 100k? MIDI connector IN USB port Type A, Type B General Power supply AC power supply terminal (KA320) Power consumption 13W Dimensions (W × D × H) 520 × 129 × 311 mm / 20.5 x 5 x 12.2 inches, Weight 5.9 kg / 13 lbs. Included Items Road case, AC power cord (KA320), patch cables, Owner’s manual, ARP sticker Accessories (Sold separately) microKEY2 series, SQ-64 amongst others